SAI | CHE WASH + BEAD
Ceramic Car Wash Soap with Hydrophobic Protection
SAI | CHE WASH + BEAD is a hydrophobic ceramic car wash soap designed to clean your vehicle while leaving behind a layer of water-repellent protection.
The high-lubricity formula lifts everyday dirt and road grime during your contact wash while hydrophobic polymers enhance gloss, slickness and water beading as you rinse.
Use it as a standalone wash-and-protect shampoo or as a maintenance wash for vehicles already protected with compatible ceramic coatings, sealants or waxes.
One wash.
Two jobs.
Clean the paint. Refresh the protection.
More Than a Car Shampoo
Traditional car shampoo has one primary job:
Clean the vehicle.
WASH + BEAD goes a step further.
As the shampoo removes everyday contamination, its hydrophobic components leave behind protection that enhances the vehicle's water behaviour and finish.
The result is a simple maintenance process:
Wash → Rinse → Bead
No additional spray protection is required when you want a fast wash-and-protect process.
Hydrophobic Protection While You Wash
The defining feature of WASH + BEAD is its ability to combine cleaning and protection in one step.
After rinsing, the treated surface is left with enhanced hydrophobic behaviour that encourages water to form beads and move more readily across the surface.
That makes WASH + BEAD especially useful for drivers who want to maintain a protected finish without adding a separate protection stage after every wash.
Clean + Hydrophobic Protection = WASH + BEAD
Made for Maintenance Washing
Protection doesn't mean a vehicle stops getting dirty.
Ceramic coatings, sealants and waxes still require regular maintenance.
WASH + BEAD fits naturally into that routine by combining a lubricating contact wash with hydrophobic maintenance.
Use it for:
- Routine maintenance washes
- Ceramic-coated vehicles
- Waxed vehicles
- Sealant-protected vehicles
- Unprotected compatible exterior surfaces
- Between deeper detailing sessions
- After appropriate decontamination treatments
It's an easy way to bring protection into a process you're already doing.
High Lubricity for Contact Washing
Contact washing introduces physical interaction between your wash media and the vehicle.
That's why lubrication matters.
WASH + BEAD creates a slick wash solution that helps your mitt move smoothly across the surface while lifting everyday contamination.
Combine it with proper wash technique, clean wash media and appropriate pressure to help minimize unnecessary friction during the contact wash.
Good chemistry works best with good technique.
Gloss, Slickness & Water Beading
WASH + BEAD doesn't stop when the dirt leaves the surface.
After rinsing and drying, the hydrophobic formula is designed to leave the finish with:
Enhanced Gloss
A freshly detailed appearance after your maintenance wash.
Slickness
A smoother finished feel across compatible treated surfaces.
Water Beading
Hydrophobic behaviour that becomes immediately visible when water meets the surface.
Protection
A maintenance layer that supplements your regular wash process.
WASH + BEAD vs pH= THICK FOAM
Both products clean your vehicle, but they serve different purposes within the SAI | CHE system.
pH= THICK FOAM
Maximum Foam Experience
Choose pH= THICK FOAM when your priority is:
- Thick foam
- Foam cannon use
- High-lubricity maintenance washing
- A more traditional pH-neutral shampoo experience
- Cleaning without intentionally adding a significant protection layer
WASH + BEAD
Wash + Hydrophobic Protection
Choose WASH + BEAD when your priority is:
- Cleaning
- Water beading
- Added slickness
- Gloss enhancement
- Hydrophobic maintenance
- Combining washing and protection into one step
THICK FOAM → Clean
WASH + BEAD → Clean + Protect
That distinction is important both for customers and for keeping the two products separated in Google search.
WASH + BEAD on Ceramic Coatings
A ceramic coating still needs to be washed.
WASH + BEAD can be used as a maintenance shampoo for compatible coated vehicles when you want to clean the surface while refreshing hydrophobic behaviour.
It does not replace the underlying ceramic coating.
Think of it as maintenance:
Ceramic Coating → Long-Term Protection
WASH + BEAD → Wash + Hydrophobic Maintenance
For customers who prefer a shampoo that primarily cleans without intentionally adding hydrophobic protection, pH= THICK FOAM is the better fit.
WASH + BEAD on Unprotected Paint
You don't need an existing ceramic coating to use WASH + BEAD.
On compatible unprotected surfaces, the hydrophobic components can provide a convenient layer of water-repellent protection during the wash process.
This makes it a useful option for drivers who want better water behaviour without performing a separate wax, sealant or coating application after every wash.
For more substantial or longer-term protection, move into a dedicated SAI | CHE protection product.
Where to Use WASH + BEAD
Designed for compatible exterior automotive surfaces, including:
- Automotive paint
- Ceramic-coated paint
- Waxed paint
- Sealant-protected paint
- Compatible exterior plastics and trim
- Compatible exterior glass
Follow the product directions and consider the specific surface or existing protection being maintained.
How to Use WASH + BEAD
Bucket Wash
1. Rinse loose contamination from the vehicle.
2. Prepare WASH + BEAD according to the recommended dilution.
3. Wash the vehicle using clean, appropriate wash media.
4. Work methodically from cleaner areas toward dirtier areas.
5. Rinse thoroughly.
6. Dry with a clean microfiber drying towel.
For additional drying lubrication and protection, incorporate DRY+ according to its directions.
Foam Cannon
Prepare WASH + BEAD according to the recommended foam-cannon dilution and equipment setup.
Apply evenly to a cool surface, avoid allowing the product to dry, and rinse thoroughly after the appropriate wash process.
After Decontamination
WASH + BEAD can also fit naturally after specialized decontamination when appropriate.
For example:
Wash → IRON REMOVER where required → TAR REMOVER where required → WATERSPOT REMOVER where required → Rinse → WASH + BEAD Maintenance Wash → Dry
Not every vehicle needs every decontamination stage.
Identify the contamination first. Use specialized chemistry only where required.
Build the Complete Maintenance Wash
For a more complete SAI | CHE maintenance routine:
Wheels & Tires → Pre-Rinse → Prewash if Required → WASH + BEAD → Contact Wash → Rinse → DRY+ → Final Inspection
The result is a simple philosophy:
Clean → Maintain → Dry → Drive
Why Choose WASH + BEAD?
Two-in-One Formula
Cleans the vehicle while adding hydrophobic properties during the same wash process.
Hydrophobic Water Behaviour
Enhances water beading after washing.
High Lubricity
Provides slick lubrication for controlled contact washing.
Gloss Enhancement
Leaves compatible exterior surfaces with a freshly detailed appearance.
Coating Maintenance
Ideal when you want to maintain hydrophobic behaviour on compatible protected vehicles.
Works Without a Coating
Can also be used on compatible unprotected paint when a simple wash-and-protect process is preferred.
Simplifies Maintenance
Adds protection during a step already required to keep the vehicle clean.
WASH + BEAD in the SAI | CHE Protection System
Different protection products serve different levels of commitment.
DETAIL SPRAY
→ Quick finishing and maintenance
WASH + BEAD
→ Protection during the wash
DRY+
→ Protection and lubrication during drying
NANO GRAPHENE / COATING WAX
→ Dedicated spray protection
MACH / MACTUM
→ Dedicated ceramic coating systems
WASH + BEAD sits at the easiest point in that system:
You're already washing the car. Add hydrophobic maintenance while you do it.
Available Sizes
500 mL
Ideal for enthusiast maintenance and drivers washing every few weeks.
1 L
Better suited to regular weekly washing and multi-vehicle households.
4 L
Designed for higher-volume enthusiasts, detailing studios and mobile detailing setups.
Frequently Asked Questions
What is WASH + BEAD?
WASH + BEAD is a ceramic car wash soap that combines routine vehicle cleaning with hydrophobic protection, gloss and water-beading enhancement.
Does WASH + BEAD add protection?
Yes. The formula is designed to leave behind hydrophobic components that enhance water behaviour and supplement your maintenance process.
Can I use WASH + BEAD on a ceramic-coated car?
Yes, it is designed to work as a maintenance shampoo for compatible ceramic-coated vehicles.
Do I need a ceramic coating before using WASH + BEAD?
No. WASH + BEAD can also be used on compatible unprotected surfaces when you want cleaning and hydrophobic maintenance in one wash.
What's the difference between WASH + BEAD and pH= THICK FOAM?
pH= THICK FOAM is your dedicated pH-neutral, high-foam maintenance shampoo. WASH + BEAD combines cleaning with an intentionally hydrophobic protection component.
Does WASH + BEAD replace a ceramic coating?
No. WASH + BEAD provides convenient hydrophobic maintenance during washing. A dedicated ceramic coating such as MACH or MACTUM represents a different level of paint protection.
Can I use DRY+ after WASH + BEAD?
Yes. DRY+ can be incorporated into the drying stage when you want additional lubrication and protection.
Can I use WASH + BEAD in a foam cannon?
Yes, if used according to the recommended foam-cannon dilution and application instructions.
Clean. Protect. Bead.
A maintenance wash doesn't have to stop at clean paint.
WASH + BEAD turns a routine wash into an opportunity to refresh gloss, slickness and hydrophobic behaviour at the same time.
Wash the car.
Refresh the protection.
Watch it bead.
SAI | CHE WASH + BEAD — Clean. Protect. Bead.
